product

1009-14-9, Valerophenone

Short Description:


Product Detail

FAQ

Product Tags

Names

Name valerophenone
Synonym More Synonyms

 Chemical & Physical Properties

Density 0.975 g/mL at 20 °C(lit.)
Boiling Point 244-245 °C(lit.)
Melting Point -9 °C
Molecular Formula C11H14O
Molecular Weight 162.22800
Flash Point 217 °F
Exact Mass 162.10400
PSA 17.07000
LogP 3.05950
Index of Refraction n20/D 1.5143(lit.)
Stability Stable. Flammable. Incompatible with strong oxidizing agents, acids, bases, plastics.

 MSDS

Name: Valerophenone 98% Material Safety Data Sheet
Synonym: 1-Phenyl-1-Pentanone
CAS: 1009-14-9

Section 1 – Chemical Product MSDS Name:Valerophenone 98% Material Safety Data Sheet
Synonym:1-Phenyl-1-Pentanone


Section 2 – COMPOSITION, INFORMATION ON INGREDIENTS

CAS# Chemical Name content EINECS#
1009-14-9 Valerophenone 98% 213-767-3

Hazard Symbols: None Listed.
Risk Phrases: None Listed.


Section 3 – HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.


Section 4 – FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:


Section 5 – FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use agent most appropriate to extinguish fire.


Section 6 – ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.


Section 7 – HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.


Section 8 – EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 1009-14-9: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA’s eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.


Section 9 – PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear light yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 105 – 107 deg C @ 5.00mmHg
Freezing/Melting Point: -9 deg C
Autoignition Temperature: Not applicable.
Flash Point: 102 deg C ( 215.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9880g/cm3
Molecular Formula: C11H14O
Molecular Weight: 162.23


Section 10 – STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Acids, bases, oxidizing agents, plastics.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.


Section 11 – TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 1009-14-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Valerophenone – Not listed by ACGIH, IARC, or NTP.


Section 12 – ECOLOGICAL INFORMATION


Section 13 – DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.


Section 14 – TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.


Section 15 – REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1009-14-9: No information available.
Canada
CAS# 1009-14-9 is listed on Canada’s DSL List.
CAS# 1009-14-9 is not listed on Canada’s Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1009-14-9 is listed on the TSCA inventory.


SECTION 16 – ADDITIONAL INFORMATION
N/A

 Safety Information

Personal Protective Equipment Eyeshields;Gloves;half-mask respirator (US);multi-purpose combination respirator cartridge (US)
Hazard Codes Xi
Risk Phrases R36/37/38
Safety Phrases S22-S24/25
RIDADR NONH for all modes of transport
WGK Germany 3
HS Code 2914399090

Synonyms

MFCD00009480
Pentanophenone
Butyl Phenyl Ketone
EINECS 213-767-3
Valerophenone
1-Phenylpentan-1-one

 

 

 

 

 


  • Previous:
  • Next:

  • contact us:

    skype/wechat/whatsapp :+8617172178866
    e-mail:victoria@chinadumi.com

     

     

    Packing

    gfhdfh (2)

     

    Why Choose US?
    1. Selecting raw materials strictly,our products are the highest purity.
    2.Reasonable and competitive price. Provide the best and professional service.
    3.Fast delivery of the samples ,samples from stock. Reliable shipping way.
    4.Full experience of large numbers containers loading in Chinese sea port.
    5. Best after-service after shipment .
    6. Professional documents for your custom clearance.

     

    FAQ:
    Q1:Will you supply samples for testing?
    A: Free samples for the quality evaluation for most products, but customers only need to undertake the shipping fee for delivery the samples to your door.

    Q2:What’s your MOQ?
    A: For the high value product, our MOQ starts from 10g,100g and 1kg.

    Q3:Which kind of payment terms do you accept?
    A: Western Union, Corporate account, BTC, etc

    Q4:How about your delivery time?
    A: Generally, it will take 3 to 5 days after receiving your advance payment.

    Q5:How do you treat quality complaint?
    A:First of all, our quality control will reduce the quality problem to near zero. If there is a real quality problem caused by us, we will send you free goods for replacement or refund your loss.

  • Write your message here and send it to us